skip to main text

Copying Originals

This section describes how to load originals and copy them to plain paper.

  1. Open the front cover (A).

  2. Extend the paper support (B).

  3. Load paper vertically WITH THE PRINT SIDE FACING DOWN.

    Push the paper stack all the way to the back of the front tray.

  4. Align the paper guides with the paper width.

  5. Open the output tray extension (C).

  6. Open the paper output tray (D).

  7. Extend the paper output support (E).

  8. Open the document cover (F).

  9. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (G).

  10. Close the document cover gently.

  11. Press the Paper button (H) to light the upper Paper lamp (I).

  12. Press the Black button or Color button (J).

Important

  • Do not open the document cover until copying is complete.

Note

  • For details on copy features, see Copying.